Difference between revisions of "MSI P35 NEO"
From Hardware
(New page: ==Mainboard Specifications== ===Processor Support=== * Intel® Core 2 Extreme *Core 2 Quad *Core 2 Duo *Pentium and Celeron in the LGA775 package ===Supported FSB=== * 1333/ 1066/ 800 MHz...) |
m |
||
| Line 1: | Line 1: | ||
| + | {{Specification | ||
| + | |Image= | ||
| + | |Image Caption= | ||
| + | |Manufacture=MSI | ||
| + | |Model=P35 NEO | ||
| + | |Manufacture link=http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1215# | ||
| + | |Short description=LGA775 Motherboard | ||
| + | |Dimension= | ||
| + | |Weight= | ||
| + | |Storage Temperature= | ||
| + | |Operating Temperature= | ||
| + | |Certifications & Standards= | ||
| + | |Category=Motherboard | ||
| + | |}} | ||
| + | |||
| + | |||
==Mainboard Specifications== | ==Mainboard Specifications== | ||
| Line 12: | Line 28: | ||
* South Bridge: Intel® ICH9/ ICH9R (optional) | * South Bridge: Intel® ICH9/ ICH9R (optional) | ||
===Memory Support=== | ===Memory Support=== | ||
| − | * DDR2 667/800 SDRAM (240pin/ non-ECC) | + | * DDR2 667/800 [[Interface:SDRAM|SDRAM]] (240pin/ non-ECC) |
* 4 DDR2 DIMMs (8GB Max) | * 4 DDR2 DIMMs (8GB Max) | ||
===LAN=== | ===LAN=== | ||
| Line 27: | Line 43: | ||
* Supports Ultra DMA 66/100/133, PIO & Bus Master operation mode | * Supports Ultra DMA 66/100/133, PIO & Bus Master operation mode | ||
===SATA=== | ===SATA=== | ||
| − | * 4 SATA ports (SATA1~4) are controlled by ICH9 | + | * 4 [[Interface:SATA|SATA]] ports (SATA1~4) are controlled by ICH9 |
| − | * 6 SATA ports (SATA1~6) are controlled by ICH9R | + | * 6 [[Interface:SATA|SATA]]ports (SATA1~6) are controlled by ICH9R |
* SATA 7 is controlled by Marvell 88SE6111 (optional) | * SATA 7 is controlled by Marvell 88SE6111 (optional) | ||
* Supports storage and data transfers at up to 300 MB/s | * Supports storage and data transfers at up to 300 MB/s | ||
| Line 65: | Line 81: | ||
To reset the bios EPROM, move the jumper called JBAT1 (located above the battery) to pins 2&3 instead of 1&2. | To reset the bios EPROM, move the jumper called JBAT1 (located above the battery) to pins 2&3 instead of 1&2. | ||
'''Note''' it seams that the Mainboard must be without power for this to work. Turn the power off at the PSU or dissconnect it. | '''Note''' it seams that the Mainboard must be without power for this to work. Turn the power off at the PSU or dissconnect it. | ||
| − | |||
| − | |||
Latest revision as of 12:24, 22 July 2009
| Manufacture | MSI |
| Model | P35 NEO |
| Link to manufacture page | link |
| Short description | LGA775 Motherboard |
| Dimension | |
| Weight | |
| Storage Temperature | |
| Operating Temperature | |
| Certifications & Standards |
Contents
Mainboard Specifications
Processor Support
- Intel® Core 2 Extreme
- Core 2 Quad
- Core 2 Duo
- Pentium and Celeron in the LGA775 package
Supported FSB
- 1333/ 1066/ 800 MHz
Chipset
- North Bridge: Intel® P35/ G33 (optional)
- South Bridge: Intel® ICH9/ ICH9R (optional)
Memory Support
- DDR2 667/800 SDRAM (240pin/ non-ECC)
- 4 DDR2 DIMMs (8GB Max)
LAN
- Supports Giga LAN 10/100/1000 Fast Ethernet by Realtek RTL8111B
IEEE 1394(optional)
- Chip integrated by VIA VT6308
- Transfer rate is up to 400Mbps
Audio
- Controlled by Realtek ALC888
- Supports 7.1 channels audio out
- Compliant with Azalia Spec
IDE
- 1 IDE port controlled by Marvell 88SE6111
- Supports Ultra DMA 66/100/133, PIO & Bus Master operation mode
SATA
- 4 SATA ports (SATA1~4) are controlled by ICH9
- 6 SATAports (SATA1~6) are controlled by ICH9R
- SATA 7 is controlled by Marvell 88SE6111 (optional)
- Supports storage and data transfers at up to 300 MB/s
RAID
- SATA1~6 support RAID 0/ 1/ 0+1/ 5 or JBOD mode (for ICH9R only)
Floppy
- 1 floppy port
- Supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB
Connectors
Back panel
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 Parallel port supporting SPP/EPP/ECP mode
- 1 serial port (COM1)
- 1 IEEE1394 port (optional)
- 4 USB 2.0 Ports
- 1 LAN jack
- 6 audio jacks
On-Board Pinheaders
- 4 USB 2.0 pinheaders
- 1 IEEE1394 pinheader (optional)
- 1 Chassis Intrusion Switch pinheader
- 1 Front Panel Audio pinheader
- 1 CD*In pinheader
- 1 SPDIF*out pinheader
Slots
- 1 PCI Express x 16 slot
- 3 PCI Express x 1 slots
- 2 PCI slots, support 3.3V/ 5V PCI bus Interface
Form Factor
- ATX (30.5 cm X 22.0 cm)
Mounting
- 6 mounting holes
Notes
To reset the bios EPROM, move the jumper called JBAT1 (located above the battery) to pins 2&3 instead of 1&2. Note it seams that the Mainboard must be without power for this to work. Turn the power off at the PSU or dissconnect it.
