Fujitsu MPE3064AT
Manufacture | Fujitsu |
Model | MPE3064AT |
Link to manufacture page | |
Short description | 6,480 MB ATA-4 Harddrive |
Dimension | |
Weight | |
Storage Temperature | |
Operating Temperature | |
Certifications & Standards |
Contents
FUNCTIONAL SPECIFICATIONS
Bytes per sector 512 bytes
Formatted storage capacity 6,480 MB
PHYSICAL SPECIFICATIONS
Track capacity (formatted) 158,720 to 257,024 bytes
Cylinders 15,193
Sectors per track 310 to 502
FUNCTIONAL SPECIFICATIONS
Seek time (track to track) 1.5 ms. typ.
Seek time (average) 9.5/10.5 ms. typ. (read/write)
Seek time (full track) 18.0/19.0 ms. typ. (read/write)
Average latency time 5.56 ms.
Rotational speed 5400 RPM
Interface ATA-4
Data buffer size 512 KB
Data transfer rate (DMA mode 2) 16.7 MB per second
Data transfer rate (PIO mode 4) 16.7 MB per second
Data transfer rate (UDMA mode 2) 33.3 MB per second
Data transfer rate (UDMA mode 4) 66.6 MB per second
Recording code 16/17 EPR4ML
Head positioning method Rotary VCM (Embedded Servo)
Spindle start time 8 seconds typical
Spindle stop time 20 seconds typical
PHYSICAL SPECIFICATIONS
Power requirement Voltage 5V +/-5%/12V +/-8% ±5%
Ripple 100/200 mV P-P
Power requirement Spin up 5V:0.8A, 12V:1.8A max.
Power requirement Read/write 5.3 W typ.
Power requirement Idle (ready) 3.4 W typ.
Power requirement Sleep 1.0 W typ.
Form Factor 3.5"/1.0"
Mounting screws #6-32UNC
Height 26.1 mm
Width 101.6 mm
Depth 146.0 mm
Weight 620 kg
Ambient temperature (operating) 5 to 55 degrees C
Ambient temperature (non-operating) -40 to 60 degrees C
Gradient 20 degrees C per hour
Relative humidity (operating) 8% to 80% % RH (non-condensing)
Relative humidity (non-operating) 5% to 85% % RH (non-condensing)
Maximum wet bulb 29 degrees C (non-condensing)
Vibration (operating) 0.5 Go-p(5 to 300Hz)
Vibration (non-operating) 4.0 Go-p(5 to 400Mz)
Shock (operating) 30Go-p,2ms
Shock (non-operating) 250Go-p,2ms
Altitude (operating) -60 to 3,000 metres
Altitude (non-operating) -60 to 12,000 metres
Acoustic noise (at 1 metre idle) 3.4 bels
RELIABILITY
MTBF (Mean Time Between Failures) >500,000 power on hours
Unrecoverable errors 1 per 10^14 bits read
Seek errors 1 per 10^6 seeks
Start/stop cycles 40,000 cycles