View source for BayStack 350

{{Specification
|Image=
|Image Caption=
|Manufacture=Nortel Networks
|Model=350
|Manufacture link=
|Short description=
|Dimension=
|Weight=
|Storage Temperature=
|Operating Temperature=
|Certifications & Standards=
|Category=
|}}


{|
|BayStack 350 Switch Ports Slot
|Autosensing 10BASE-T/ 100BASE-TX 
|MDA
|-
|BayStack 350-12T
|12
|1
|-
|BayStack 350-24T
|24
|1
|}

==Description==
Nortel Networks introduces the next
generation of the most successful
workgroup switches ever. Completely
redesigned for faster throughput, support
for high-speed uplink options, and leadingedge
software features, new BayStack* 350
Switches carry on the Nortel Networks
tradition of affordable, high-performance
workgroup switching.
BayStack 350 Switches support 10/100
autosensing on all UTP ports, for seamless
migration to 100 Mbps connections without
time-consuming trips to the wiring closet
whenever end stations are upgraded to
Fast Ethernet. To further simplify network
setups, all ports also automatically sense
half- or full-duplex connections for
high-speed server or switch-to-switch
configurations.
BayStack 350-12T and BayStack
350-24T Switches feature 12 and
24 10BASE-T/100BASE-TX
ports respectively 
For high-bandwidth traffic 
to the network core, both switches offer
a Media Dependent Adapter (MDA) slot
for Gigabit Ethernet, Fast Ethernet fiber,
10/100 autosense Ethernet, and future
ATM ports

==Default passwords==
Console Password -- Enables password protection for accessing the CI through a TELNET session, a console terminal, or both.
If you set this field to Required, you can use the Logout command to restrict access to the CI. Thereafter, you will need to specify the correct password at the console-terminal prompt.

Caution: If you change the system-supplied default passwords, be sure to write the new passwords down and keep them in a safe place. If you forget the new passwords, you cannot access the console interface. In that case, contact Bay Networks for help.

* Console Read-Only Password user
* Console Read-Write Password secure
* SNMP Read-Only Community String public
* SNMP Read-Write Community String private 
*If you are running an older version of  the firmware (v1.x), "NetICs" (minus quotes) is the backdoor password.